Baldor TSD DC Servo Drive TSD-050-05-1-U

The TSD from Baldor is a DC servo drive providing control 

for DC servo motors. Operating directly from 115 VAC it 

will provide up to 5 amps continuous (peak = 2x) and will 

power servos requiring 50 or 100 volt bus. The TSD is a totally 

enclosed, stand alone unit. 

Features:

1 or 2 axis of servo control, up to 500 watts per axis 

Direct 115 operation with models providing 50 v and 100 V bus 

5 amp continuous; 10 amp peak per axis 

Easily interfaces with today’s motion controllers 

Standard +/- 10 Vdc input command 

Simple easy front panel adjustments with LED status indicators 

Fully protected unit - over/under voltage, over temperature, excess/surge current, short circuit protection, loss of logic voltage 

Description                         Unit

Rated Bus Voltage (nominal)         VDC   50

Continuous Current                  A     5

Peak Current                        A     10

Maximum Time                        Sec   2

Peak Current Adjustment             A     0-10

Switching Frequency                 kHz   20

Form Factor                               1.01

Minimum inductance                  mhy   1.0    

Frequency Response                  kHz   2.5

Positive Logic 15 VDC               mA    20

Negative Logic 15 VDC               mA    20

Minimum Motor Inductance            mhy   1.5

Differential Input                  ±VDC  5 to 15

Impedance                           k Ω   20

Operating Temp                      °C    0-50

Drift                               µV/°C 10

Weight                              lbs.  14