Airtac solenoid valve

1.  Internally piloted structure.

2.  Structure in silding column mode:good tightness and sensitive reaction.

3.  Double control solenoid valves have memory function.

4.  Internal hole adopts special processing technology which has little attrition fricition, low start pressure and long service life.

5.  No need to add oil for lubrication.

6. Install in the side plate with the surface upwarod,which can be used.

7.  Affiliated manual devices are equipped to facilitate installation and debugging.

8.  Several standard voltage grades are optional.

Fluid                     Air(to be filtered by 40um filter element)

Acting                              piloted   

Port size                      In=Exhanst=1/8"   

Vaild area of section          14.0m㎡(Cv=0.78)

Valve type                        5 port 2 position 

Lubrication                      Not required 

Operating pressuer               0.15-0.8MPa(21-114Psi)

Proof pressure                       1.5MPa(215Psi)

Temperature   ℃                   -20-70

Material of body               Aluminum alloy

Max. frequency                  5cycle/sec

Weight                                   320g